Field Of Application - Lavor HP Instrucciones De Montaje

Important Advices
Caution!
• Always make sure that the materials or the surfaces to be cleaned are suitable for the
steam cleaner.
• Follow the manufacrure instructions about the cleaning of materials.
• If no information is available, make always a trial on a little visible point of the material.
Should any damage appear, don't use the steam cleaner.
• Only professionally qualified personnel must be allowed to replace the electric cable.
• Always use the accessories recommended.
• Always put a cotton cloth on the brushes to avoid scratches.
• On vertical surfaces, always work from the top to the bottom. Put a cloth
under the surface to be cleaned, to collect dirt.
• Use the extension pipes only if necessary.
• Spray the steam on small surfaces at a time. The dirt just dissolved can be removed more
easily.
• In case of dirt hard to remove, treat the surfaces directly with the steam jet.
• To remove stains from upholstered furniture or carpets, spray the steam on dirt, then run the
triangular brush over the surface gently, without exerting any pressure. Let the treated surface
get dry and see if the stain has disappeared. In case the result shouln't be satisfactory, repeat
this procedure.
• On delicate surfaces, such as wood surfaces, spray a little steam quantity and dry immediately.
• Carpets must be cleaned first with the vacuum cleaner and then with the steam cleaner.
Warning
• The steam jet can't remove any lime deposits; these must be removed by using ecological
vinegar.

Field of application

The steam cleaner is suitable for cleaning:
Wide surfaces, such as:
• Tiled floor, parquet, stone and linoleum floor.
• Tiled floor treated with wax (wax removal)
• Tiles or tiled walls
• Roller shutters, guillotine windows
• Carpets
Small surfaces, such as:
• Interstices of heat radiators, tiles, skirting boards
• Door or window frames
• Shutters
Glass surfaces, such as:
• Windows, glass walls
• Glass doors
• Mirrors
Upholstery, such as:
• Carpets and moquettes
• Upholstered furniture (sofas, airmchairs)
Caution!
• Furniture surfaces can be treated with the steam cleaner, on the following
conditions:
• Never clean with the direct steam jet.
• Always use a soft absorbent cloth
• Work with little steam pressure
• When you clean, don't exert any pressure with the brush.
Warning
• With the iron special accessory, you can iron your underwear or refresh clothes.
Start the steam cleaner
Fill with water
Caution!
• Before filling the boiler with water, unplug the machine.
• Fill the steam cleaner only with normal tap water or with distilled water.
• The steam cleaner must rest on a plane surface
Press the boiler cap (2) downwards and turn it anticlockwise at the same time, so as to
unscrew it completely.
Pour an adequate water quantity (min. 0.5 l - max. 1,6 l) into the boiler.
Put the cap on the boiler: press it downwards and turn it clockwise at the same time,
so as to screw it tight.
Caution!
• Make sure that the boiler cap is properly closed.
17 18
2 2