Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARING THE AREAS THAT ARE TO BE TREATED
•
The skin must be shaved, clean, dry, with no make-up, anti-perspirant
or deodorant.
•
Moles, birthmarks, dark spots, tattoos and lips must be covered with a
white pencil or white patches.
ATTENTION:
Before starting the treatment, read the paragraphs relative to safety warnings,
contraindications, precautions for safe use, possible side effects, treatment
areas and hair removal program.
PREPARING THE APPLIANCE
1.
Remove the handpiece and the other components from the package.
2.
If the appliance is stored in a very cold place, wait for it to reach at least
15°C.
3.
Insert the connector (7b) into the base connection (6).
4.
Connect the power supply plug (7a) to an electric socket: the stand-by
LED lights up (9).
FIRST TREATMENT
5.
Press the switch-on/stand-by button (8): the switch-on LED (10) lights
up and the ventilation system is activated (the noise is similar to that of
a hair dryer).
USE
EN
79
Publicidad
Tabla de contenido
