AnyTone AT-D878UV Manual De Instrucciones página 71

Monitor Monitor the weak signal or the signal with unmatched ID.
Main CH Switch Choose channel A or channel B as the main channel
Hot Key 1~6 Selects Hot Keys 1-6 Note: Hot key setup details on next page
Work Alone Turn on/off the work alone function.
Nuisance
During scanning, press the key to skip the unwanted channel
Delete
Digi Monitor In DMR mode, press the key to turn on/off digital monitor
Sub CH Hide Turn on/ off the sub channel
Prior Zone Switch to Priority Zone
"Press the key to start the scan in VFO channel scan start and end
Program Scan
frequency must be programmed in CPS."
In digital channel, switch the microphone tone to normal or
Enhance Sound
enhanced mode.
In digital channel, press the key to access the last call and press
LastCall Reply
PTT to call back.
Switch ChType Switch the channel type(Analog, Digital, Ana+Dgi, Dgi+Ana)
When the radio receives a call and the suspension time is on, press
the key programmed as" Ranging" to obtain the caller's position and
Ranging
distance. (Both party need GPS positioned, or will receive only GPS
information)
In standby, press the key programmed as "Roaming" to search and
lock on the repeater with strongest signal. (Note: After lock on a
Roaming repeater, the radio will return to last frequency only after channel
or frequency is changed. The repeater frequency list must pre-
programmed in CPS.)
In standby, if the call contact type for a channel is "Single call" ,
Channel press the key programmed as " Channel Ranging" to turn on this
Ranging function. The radio will automatically start ranging function when turn
to this channel.
In standby, press the key programmed as" Max Volume", will enable
Max VOL Set
users to set the maximum RX volume.
Choose Slot for current channel, this function is only valid in repeater
Slot Set
mode.
Aprs Type Choose Aprs Type for current channel.
In standby, press the programmed "Zone Select" key, it will allow
Zone Select you input the zone number and then press confirm key will switch to
the zone.
Roaming Set Sets Roaming Function
APRS Set Sets APRS Function
11
4. RADIO OVERVIEW
AT-D878UV Digital DMR and Analog UHF/VHF Two Way Radio