New Channel; Delete Channel; Receiving And Responding To A Radio Call - AnyTone AT-D878UV Manual De Instrucciones

Different Color Code: The radio can transmit if the channel is free, but
(3)
the color code is mismatch.
Same Color Code: The radio can transmit only if the channel is free and
(4)
the color code matches.

New channel

5.7
Press (Menu) to enter main Menu.
(1)
Select "Settings".
(2)
Select "Chan Set".
(3)
Select "New Chan".
(4)
Input the channel number by keypad, press
(5)
Select a zone from zone list, then Confirm To Save. The radio will start
(6)
channel saving, and saving is completed when it displays "Saved".
Now select the new channel in the radio and go to Channel Settings
(7)
menu to set up all the new channel's parameters.
Fast saving a new channel:
Note: Hold
press [P1] key to start a new channel from above step 5.

Delete Channel

5.8
In channel (MR) mode, press
(1)
Select "Settings".
(2)
Select "Chan Set".
(3)
Select "Delete Chan" to delete current channel.
(4)
Fast delete a channel:
Note: Hold
press [P2] key to delete current channel.

Receiving and Responding to a Radio Call

5.9
When the radio is in the digital mode, it can receive and respond to a call
with the same frequency/color code/ slot. When receiving a call:
a.
If the radio is programed with callers DMR ID number in the digital
contact list, when receiving a call, the radio will ring or vibrate briefly.
b.
The blue LED lights up.
c. The left top corner of LCD shows the RSSI icon, and the LCD display
will show DMR ID/name/city/state/country/call type and incoming icon
based on what is in the contact list.
AT-D878UV Digital DMR and Analog UHF/VHF Two Way Radio
5. BASIC OPERATIONS
(Menu) until displays "Next Please Press Dial Key", then
(Menu) until displays "Next Please Press Dial Key", then
to confirm.
(Menu) to enter main Menu.
14