Auto-Off Function; Switching Off; Cleaning And Maintenance - Imetec Scaldasonno Adapto M 6T Instrucciones De Uso

greater than that advised for night-time or continuous use.
If the appliance is used with the control unit set to a temperature
EN
greater than that advised, the user may burn their skin or suffer from
heatstroke.
WARNING!
or under the sheets when in use.

AUTO-OFF FUNCTION

The underblanket has an automatic switch-off function which is activated after 1 hour, 3 hours or
9 hours. When switched on, the control unit automatically sets itself to 1 hour on the auto-off timer
and LED 1 lights up in green (10). To change the programming of the auto-off time, press the timer
selector button (6) and select the desired temperature. Each time the auto-off time is reset, the
timer starts from zero. When the time has elapsed, the underblanket switches off and the standby
LED (9) lights up in blue.
NOTE: Should the power supply accidentally be interrupted during use, when
the control unit is switched back on it will maintain the temperature and timer
settings in use previously and the timer counter will start from zero.
NOTE: So that the display light does not bother users during the night, the
light intensity reduces around 15 seconds after any button is last pressed.
Similarly, the standby LED becomes less bright 15 seconds after it is activated.

SWITCHING OFF

Switch the underblanket off by pressing the ON/OFF button (7) and remove the plug from the
socket (3).
The underblanket is washable. Check the washing symbols on the label to ensure it is
washed correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the underblanket
before cleaning or performing maintenance.
BEFORE WASHING
• Take the plug of the control unit cable out of the mains socket (3).
• Press the grip levers at the sides of the control unit connector (2) to remove the control
17
DO NOT get into the bed with the appliance set to a temperature
DO NOT place the control unit under the pillow

CLEANING AND MAINTENANCE