Beurer BM 55 Manual De Instrucciones página 25

Tensiómetro para brazo
Ocultar thumbs Ver también para BM 55:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dimensions
7.3 in (L) x 3.7 in (W) x 2.2 in (H)
(186 x 95 x 56 mm)
Weight
Approximately 11.1 oz (316 g)
(without batteries and cuff)
Cuff size
8.7 in – 16.5 in (22 – 42 cm)
Permissible operat-
+50 °F to +104 °F (+10 °C to +40 °C),
ing conditions
0% ≤ 90% relative air humidity
(non-condensing)
Permissible storage
-4 °F to +131°F (-20 °C to +55 °C),
conditions
≤ 90 % relative air humidity,
800-1050 hPa ambient pressure
Power supply
4 x 1.5 V
Battery life
For approx. 100 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories
Instruction for use, 4 x 1.5V AAA al-
kaline batteries, storage pouch
Classification
Internal supply, IPX0, no AP or
APG, continuous operation, type
BF applied part
AAA batteries
25
Key to symbols
application part Type BF
approx. 3 minutes after last button
Auto-shut-off
operation
These specifications are subject to change without notice
for purpose of improvement.
The serial number can be found on the unit itself or in the
battery compartment.
• This unit is in line with European Standard EN60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this instrument. For more details, please
contact customer service at the address indicated.
• The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical products act
and European standards EN1060-1 (non-invasive Blood
Pressure Monitors, Part 1: general requirements) and
EN1060-3 (non-invasive Blood Pressure Monitors, Part 3:
Supplementary Requirements for Electromechanical
Blood Pressure Measurement Systems).
WARNING! Read the safety
information and all instruc-
tions to avoid serious injury.

Publicidad

Tabla de contenido
loading

Tabla de contenido