Programs; My Program; Program Under Shortcut P1/P2 - Velux KLR 100 Manual Del Usuario

Programs

A program contains a sequence of commands on how and
when the products are to be operated.
There are three different program types:

• My program

A personal program that will be activated automatically
without using the remote control.
For instance you can record a morning program to
run up the roller shades in the bedroom and open the
skylights between 7 and 7.15 am on weekdays from
October to April.

• Program under Shortcut P1/P2

A personal program that can be activated by using the
shortcut keys.
For instance you can record and save a program under
shortcut key P1 to close all skylights in the house and
draw all blinds down by 50%.
• Synergy program
A pre-defined program for control of exterior
sunscreening products optimised for the European
countries and based on local conditions.
32 VELUX
ENGLISH
My program
My program is an automatically activated program which
contains a sequence of operating commands for one or
more products. The sequence is automatically activated at
a pre-set time within a period defined by a starting date
and an end date.
The example shows how to program skylight No. 1 (indi-
cated as "Window" in the remote display) to open
at 6.30 pm and close again at 10.00 pm each Monday for
12 months.
1
Press "Menu".
2
Scroll through the menus:
Program settings Record
Note: If the current time and date has not been set
already, please do so before choosing "My program", see
section Time and date.
3
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press "Select" to choose the product.
4
The display shows the selected product.
• Press "Enter" to confirm your choice.
• Press "Edit" to select additional products from the
list.
5
Press to highlight "Set position".
Press "Enter" to confirm your choice.
Menu
my program
No. 1
No. 2
No. 3
Select
P1
No. 1
Enter
P1
set position
save position
Enter
P1
ENGLISH
House
No. 1
Window
Locate
HousE
WiNdoW
Back
P2
HousE
WiNdoW
Edit
P2
PositioN
Back
P2
VELUX 33