Controls And Indicators; How To Use; Power On/Off; Transmitting And Receiving - Albrecht Multicom Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2. Controls and Indicators

USB socket

3. How to use

3.1. Power On/Off

Press and hold the „Power" button longer than 3 seconds to turn the device on.
The unit is starting with the last selected volume level
After that press and hold the „Power" switch again for 3 seconds to turn the device off.

3.2. Transmitting and Receiving

In a master radio with ID „00", transmitting and receiving are activated automatically
as soon as its ID is set with „00".
All other units in the group can activate and deactivate transmission by holding the
"Talk" button for 2 seconds. The state is signalled by the "Talk" symbol in the upper left
corner of the display. Reception is always active as long as the radio is switched on.
Antenna
Up/Down
Talk Button
Button
Mode Button
Talk/State LED
Charging
LED
LCD
Headset sockets
English
Power
15

Publicidad

Tabla de contenido
loading

Tabla de contenido