3.2.1. Talking List
5 units in a group can talk simultaneously while up to 94 units can listen.
As soon as 5 units are speaking the display shows "PTT1". If now one of the listeners
is activating "Talk" the unit which has been talking the longest is removed from the
talking list. This unit hears a signal tone.
User 1 (Master)
User 2 (Talk)
User 3 (Talk)
User 4 (Talk)
User 5 (Talk)
User 6 (receive only)
User 7 (receive only)
User 8 (receive only)
If now another user presses "Talk" user 3 would be removed from the list and so on.
In case user 7 only wanted to make a short announcement he should disable "Talk".
This way user 2 can get back to talking without removing somebody else from the
talking list.
The list above is only an example and can be extended to 99 users total.
In some cases it makes sense to restrict some users to "Listen only". To enable this
refer to chapter "„3.1.5. Receive only (PTT ON/OFF)" auf Seite 18
3.3. Volume Up / Down
It gives you to adjust the hearing volume level with 6 steps as per you prefer.
Press „▲" button to control volume up and „▼" button for volume down after turn the
device power on. It is available to adjust the volume level 0~6 from low to high.
3.1. Menu
The menu settings can be viewed by short clicking the menu button repeatedly. To
change the settings press the menu button for at least 3 seconds until GRP starts
16
User 7 presses Talk
English
User 1 (Master)
User 3 (Talk)
User 4 (Talk)
User 5 (Talk)
User 7 (Talk)
User 6 (receive only)
User 2 (receive only)
User 8 (receive only)