Mains Connection; Connecting Headphones - Silvercrest SWEP 500 A1 Instrucciones De Uso

• Replace the cover on the battery compartment.
If the batteries become too weak, this is indicated by the symbol
blinking in the display. Subsequently, the appliance then switches itself off.

Mains connection

• Connect the plug of the mains adapter to the
the side of the device.
• Plug the mains adapter into an easily accessible socket. To avoid
tripping hazards, please avoid using an extension cable.
Note:
When the power adapter is connected the device is supplied with electricity
only through the power adapter, not from the batteries. The installed batte-
ries are not charged. In the event of prolonged use of the power adapter the
batteries should be removed from the battery compartment. Otherwise there
is a risk that the batteries may leak.

Connecting headphones

On the left side of the radio, you will find the headphone socket.
Caution!
With this appliance, use only the supplied type E105 headphones.
• Insert the headphone jack plug into the headphone output.
The speaker will be deactivated automatically.
Caution:
Listening to music with headphones for long periods and at high
volume levels can lead to hearing damage!
AC
- 107 -
9V 400 mA
socket on
~