Velleman HAA2850 Manual Del Usuario página 11

• It is recommended to program a different code for every user.
-
group 1
00 ~ 99
group 2
0 ~ 9
Configuring output modes
duration
1 ~ 999
-
-
duration
1 ~ 999
-
-
Keypad settings
attempts
5~10
00
Door forced-open alarm
Output activation announcer
v4 - 15.11.2013
4~8 digits
4~8 digits
4~8 digits
output 1 in momentary mode from 1 to 999 seconds
(default: 401 = 1s)
output 1 in Start/Stop mode (toggle)
output 1 in Start/Stop mode (toggle) with accelerated
code
output 2 in momentary mode from 1 to 999 seconds
(default: 501 = 1s)
output 2 in Start/Stop mode (toggle)
output 2 in Start/Stop mode (toggle) with accelerated
code
after 10 successive wrong codes the keypad locks for
30s (default)
after 10 successive wrong codes, the duress output
[f] switches to ground
after 5 to 10 successive wrong codes the keypad locks
for 15min – use the master code to reset at any time
reset above keypad settings
door forced-open alarm enabled
door forced-open alarm disabled (default)
notifying beep (1s) is given to notify the person outside to
open the door when output relay is activated via a user
code or egress button (default)
HAA2850
master code
100 user codes in group 1 for output 1
(with duress code function)
10 user codes in group 2 for output 2
11
©Ve llema n nv