Reversing The Door Hinge; Door Reversal - Summit FF410WH Manual Del Usuario

Reversing the Door Hinge

1. Remove the top hinge cover. (see fig. # 1)
2. Using a phillips pead screwdriver, loosen and remove the screws
holding the top hinge in place. (see fig. # 1)
3. Remove the top hinge and carefully lift off the door.
4. Remove the screw hole plug from the opposite side and insert the
plug in the screw hole openings of the just removed screws.
(see fig. # 2)
5. Remove the door pin from the bracket of the lower hinge by turning
counter clockwise. Move the pin to the opposite hole and tighten.
(see fig. # 3)
6. Loosen the screws holding the lower hinge bracket and remove the
hinge. (see fig. # 3)
7. Align the holes in the lower hinge bracket to the corresponding
holes in the opposite side of the cabinet. Insert and tighten the
screws. (see fig. # 3)
8. Align the bottom hole on the left side of the door with the pin of the
lower hinge and slide into place.
screw hole plugs
fig. # 2
English
8