Operation; Energy Saving Tips - Dometic ECOLINE RH430LD Instrucciones De Montaje

Ocultar thumbs Ver también para ECOLINE RH430LD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
RH4xxLD, RH4xxLG
6.2
Mounting the sliding hinge (optional)
You can mount a sliding hinge that allows the cooling device door to be opened
together with the door of the built-in cabinet (fig. 8, page 5, to fig. m, page 8).
6.3
Reversing the door
Reverse the door as shown in fig. n to fig. r on page 9.
For doors with a sliding hinge proceed as shown in fig. p to fig. q on page 9.
7

Operation

!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 18).
If a few drops of water form inside the cooling device after it has been
cooling for a lengthy period, the cooling device is not defective. Air
moisture condenses to water when the temperature in the cooling
device falls. Wipe the water out with a dry cloth if necessary.
7.1

Energy saving tips

Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
EN
Operation
17

Publicidad

Tabla de contenido
loading

Tabla de contenido