ALLURIS SMT-200C Instrucciones De Servicio página 10

8.0 Technical Data / Maintenance
Measuring range max.:
Accuracy:
Temperature range:
Storage:
The instruments are maintenance free, except wear and tear and
consumption parts.
9.0 Troubleshooting
Display fades out, laser
Check the remaining voltage and polarity of the batteries.
Laser beam not visible:
Check right function of measuring button.
Incorrect or not repeatable measuring values at non-contact mode:
Highly reflective surfaces may disturb the receiver electronics.
Change angel or paint the surface black.
Confirm that the distance between instrument and object is not
shorter than 15 cm and that the reflective tag is securely aimed
at. If necessary use a bigger reflective tag.
Incorrect or not repeatable measuring values at contact mode:
Check the rubber surface of the attachment accessory, whether
it is not worn out or slippery.
Confirm the perpendicular alignment of the instrument against
the measuring object.
Avoid any movement of the instrument while measuring. If
possible use non-contact mode.
LED Display indicates a flashing <<B>>:
This indicates low voltage, change the batteries.
10.0 Warranty
We grant a 24 month limited warranty period starting with the date of sale.
Consumption material, normal wear and tear as well as damages caused
by improper use are excluded from this warranty.
99.999 rpm (contact mode 25.000 rpm)
0,006% +/- 1digit
0°...40°C
-10°...55°C (keep dry)
beam not visible: