/i
DANGER or WARNING
Symbol: warning of unsafe working conditions if the instructions are not followed.
This symbol is displayed with all safety regulations related to situations that are life-
threatening (danger), present a danger of personal injury (warning), or both.
/i
Caution
Symbol: warning of danger of operational safety of the product or the system.
This symbol is displayed in the user manual with all regulations related to preventing
damage to the product or the system.
/i
Note
Symbol: emphasizes important information for optimal product use.
This symbol is displayed in the user manual with all regulations related to product use or
maintenance.
Always adhere to these regulations and to the locally prevailing safety regulations, and proceed very
carefully.
Inform all people involved in the activities of the operation about these safety regulations.
2.2
Model plate and CE marking on the equipment
Refer to Fig. 1.
All pictograms attached to the equipment pertaining to safety and danger must be complied with and
remain clearly legible.
WARNING
Not following these instructions can result in serious personal injury, fatal accident, damage
to the system or consequential loss.
/i
Type of mark
Position Description
Ban
D
F
H
Indication
A
B
E
G
I
J
Model plate
C
HLB
Never use a working pressure of more than 8 bar (116 PSI).
Do not put additional loads on a load which has already been lifted.
Never place fillers between the bag and the load but put the bag on the
fillers as close to the load as possible.
Read the user manual before use.
Provide protection against sharp edges and protrusions.
Maximum inflation height, air volume and effective lifting force.
Wear personal means of protection.
Always follow the load with supports.
Do not stack more than two lifting bags.
If two different lifting bags are used, the largest bag is used underneath.
Manufacturer's information stating: name, CE marking, model indication,
EN marking.
916.000.090_004
EN
21