MSA Latchways SRL Serie Manual De Instrucciones página 4

EN EN
Latchways SRL certificate of conformity
Manufactured by
Latchways plc
Hopton Park, Devizes
Wiltshire, SN10 2JP
United Kingdom
Tel: +44 (0) 1380 732700
Fax: +44 (0) 1380 732701
email:info@latchways.com
www.latchways.com
When tested in accordance with
EN 360:2002, IRAM 3605: 2005,
NBR 14628:2010
When tested in accordance with
ANSI Z359.14 – 2012
When tested in accordance with
CSA Z259.2.2-98 (reaffirmed 2009)
When tested in accordance
with OSHA 1910.140
Disclaimer
Every effort has been made to ensure that the information contained within these user
instructions is both accurate and current. As part of Latchways' continuous improvement
programme changes may be made to the product after the publication date. Therefore,
occasionally, the product and these instructions may slightly differ.
Warranty details
Latchways warrants the Latchways SRL, excluding auxiliary components, against defects
in materials and workmanship. Full terms, conditions and duration can be found at
www.latchways.com/warranty. Latchways does not warrant against normal wear and tear,
nor damage caused by accident or abuse. If a claim is submitted under warranty, Latchways
will either repair, replace or refund the Latchways SRL at Latchways' discretion. Warranty
benefits are in addition to any statutory rights provided under local consumer legislation.
Date of first use:
*Date of first use shall be administratively provable. Where the date of first use is unknown, then the next previous
administratively provable date shall be used, e.g. date of purchase or date of manufacture.
4
Attestation of conformity
Notified Body number 0321
SATRA Technology Centre Ltd
Wyndham Way, Telford Way
Kettering, Northamptonshire
NN16 8SD, United Kingdom
Tel: +44 (0)1536 410000
IRAM: Instituto Argentino de
Normalización y Certificación, Perú
552/6, C1068AAB, Buenos Aires,
República Argentina.
CSA: CSA International, CSA
Group, 178 Rexdale Boulevard,
Toronto, Ontario, Canada,
M9W 1R3. Number 205693.
(page 2) The date the unit is removed from the packaging.
Production control
phase
Notified Body number
0194
INSPEC Certification
Services
56 Leslie Hough Way
Greater Manchester
M6 6AJ
United Kingdom
Tel: +44 (0)1617 370699
Maximum arrest force 6 kN (1350 lbs).
Maximum arrest distance 2 m (78.74").
Maximum arrest force 8 kN (1800 lbs).
Maximum arrest distance 1.37 m (54").
Average arrest force 4 kN (900 lbs).
Maximum arrest force 8 kN (1800 lbs).
Maximum arrest distance 1.4 m (55").
Maximum arrest force 1800 lbs (8 kN)
Maximum arrest distance 42" (1.07 m)