Signs, Symbols And Abbreviations Used En; Emergency Information En; Scope Of Delivery - Abicor Binzel MF Control Manual De Instrucciones

4 Scope of delivery

3.3 Signs, symbols and abbreviations used
The following abbreviations are used in these operating instructions:
eBOX
MF Control
LCD
CAN-BUS
LED
Unit of measurement in drawings or diagrams
Tab. 3
In these operating instructions, the following signs and symbols are used:
Symbol Description
•

1
A
Tab. 4
3.4 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Power
• Further measures can be found in the operating instructions or in the documentation for other peripheral
devices.
4 Scope of delivery
• MF Control
• MFS service software V6.0 or above (pre-installed)
Tab. 5 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product
catalogue. Contact details for advice and orders can be found online at www.binzel-abicor.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last carrier immediately. Keep the
packaging for possible checks by the carrier.
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have questions
concerning the packaging or how to secure the device, please consult your supplier, carrier or transport
company.
Tab. 6 Transport
EN - 6
Control of the MFS wire feeding unit
Operating panel for wire feed monitoring (MFS service software)
Liquid-crystal display
Controller Area Network Binary Unit System
Light-emitting diode
Dimensions
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
Step(s) described in the figure to be carried out in succession
Signs and symbols
• Operating instructions
MF Control
Millimetre [mm]