Product Information; Introduction; General Features - Mocom Millwashing Manual Del Operador

PRODUCT
INFORMATION

INTRODUCTION

GENERAL
FEATURES
4
is an instrument washer and thermo-disinfector specially designed for
use in dental surgeries.
It provides optimal performances, cycles for efficient treatment of solid materials, and
ease of use.
It represents an interesting solution for all professionals that require equipment with
favourable price/quality and performance ratio.
is an electronically controlled unit managed by a microprocessor.
It consists of a cleansing compartment with a door provided with a sealing gasket,
washing detergent tank, washing pump, detergent pump, drain pump, filters within the
internal plumbing, a set of electro magnetic valves for the hydraulic operation and a
coil for the steam condensation. A control panel allows to select the cycles and set a
series of operating parameters; LCD display shows alarm messages for a quick
troubleshooting.
The unit is equipped with a water softener to reduce the quantity of scale contained in
the water network. The softening rate can be programmed according to the water
hardness.
Thanks to the electronic management and the integrated sensors, thermostats and
pressure switch, an high stability of thermodynamic parameters is obtained and
consequently an optimal process control. An internal memory stores the data and
events related to a maximum of 4000 cycles performed.
is equipped with effective safety devices to preserve the user from
injuries due to malfunction and anomalies.
P
LEASE REFER TO
DESCRIPTION OF THE SAFETY DEVICES
NOTE
A A (T C
PPENDIX ECHNICAL HARACTERISTICS
.
)
FOR A