Select The Language For The Displayed Messages; Print The Stored Reports - Mocom Millwashing Manual Del Operador

Select the language for the displayed messages

Action
Press repeatedly
1
Press the key
Press the key
1
Press the key

Print the stored reports

Action
Press repeatedly
1
Press the key
A
T THE END OF THE PRINTING
Description of the fields in the Events History
The microprocessor records and stores the data of the performed cycles and the possible fault events. These data
are arranged in the following fields:
DATE START TIME
dd-mm-yy 12.00
dd-mm-yy 13.05
The memory capacity allows the data recording of maximum 4000 cycles. Reaching the 90% of available capacity,
the display will show a proper message (TRANSFER DATA). Carry out the print operation and delete the history
archive to allow new records.
Faults occurred during the cycles are shown in the field FAULTS with specific numeric codes (see Appendix "D" –
Alarm messages):
18
Description
Displays the Menu options up to the language
selection option
Access to the currently selected language
Change of language for displayed messages
Stores the selected language and goes back to
Menu
Description
Displays the Menu options up to the print reports
option
Prints all the stored cycles
NOTE
,
THE UNIT AUTOMATICALLY GOES BACK TO
PROGRAM
Short
Normal
(two-lines messages)
(two-lines messages)
M .
ENU
MAX °C HOLD>85°C
90°C
60 seconds
(93°C as option)
90°C
180 seconds
(93°C as option)
Display
Language
Language
Italian
Language
English
Menu
Display
Print reports
Print
To quit: Stop
FAULTS
00
00