Setting The Clock - Samsung NE59N6650 Serie Manual Del Usuario

Operating the oven
08 Steam Assist: Use to select the steam assist function of the oven.
09 Keep Warm: Use to select the keep warm function of the oven to keep cooked food
warm.
10 Smart Control: Use to select the smart control feature.
11 Steam Clean: Use to select the steam cleaning function of the oven.
12 Self Clean 2/3/5h: Use to select the Self-cleaning function of the oven.
13 Temp.: Use to set temperature of the oven.
14 Timer On/Off: Use to set or cancel the minute timer. The minute timer does not start or
stop cooking.
15 Cook Time: Press, and then use the number pad to set the amount of time you want
your food to cook. The oven will shut off when the cooking time has run out.
16 Delay Start: Press to set the oven to start and stop automatically at a time you set.
(Bake, Convection Bake, Convection Roast, Cook Time, and Self Clean only.)
17 Clock: Use to set the time of day.
18 Clear: Use to reset the number pad.
19 Lamp: Press to turn the oven light on or off.
20 OVEN OFF: Press to cancel all oven operations except the clock and timer.
21 START/SET: Press to start any cooking or cleaning function in the oven.
22 Warming Drawer (6650W* model only): Press to turn the warming drawer on or off.
(Low, Med, Hi)
26 English
NE59N6650W_DG68-01049A-01_EN+MES+CFR.indb 26

Setting the clock

The clock must be set to the correct time of day for the automatic oven timing
functions to work properly.
• The time of day cannot be changed during a timed cooking, a delay-timed
cooking, or a self-cleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1. Press Clock.
2. Enter the current time in hours and minutes on the number pad, eg. 1, 3, 0, for
1:30.
3. Press Clock or START/SET to save the changes.
How to change between a 12-hour and 24-hour display
1. Press Broil and 4 on the number pad at the same time for 3 seconds. The
display will show the present mode (eg. 12 hour).
Press 0 on the number pad to select 12 hour or 24 hour.
2.
3. Press START/SET to save changes.
7/10/2018 12:10:13 PM