Digital Recording - Sony SDP-E800 Manual De Instrucciones

Processor Operations

Digital Recording

This processor makes it easy to make digital recordings
from the components connected to the processor. You
don't have to connect playback and recording
components directly.
Before you begin, make sure you've connected all
components properly.
Playback component
(CD player, etc.)
ç: Signal flow
EXAMPLE:
See your DAT or CD player's instruction manual if you
need help.
1
Press DIGITAL 2 (if a CD player is connected to
the DIGITAL 2 INPUT) to select the CD player.
2
Insert a blank digital audio tape into the DAT for
recording.
3
Start recording on the DAT and then start playing
the CD you want to record.
Notes
• You cannot record the digital signal from a Dolby Digital
(AC-3) programme source.
• You cannot record the video signal from a connected
source component.
18 GB
Digital recording
component
(DAT deck, MD deck)
Recording a CD using a DAT deck.