Technical Assistance - Guarantee - Extel IRON 2 Instrucciones De Uso

10. OPTION
• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Additional monitor: MN IRON 2
• 2nd roadside panel: PL IRON 2

11. TECHNICAL ASSISTANCE - GUARANTEE

Anomaly
• The monitor does not
turn on
• Bad image and/or bad
sound
• Does not stop ringing
• Image is too bright
• Monitor or second
outdoor station not
working
• The visitor is not
recorded
• Does not ring
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69 (0,337€ttc/min)
Last version of the dowloadable manual in color on :
Possible Cause
• The monitor is not con-
nected to a power source
• ID configuration
• Environment
• Wiring
• Camera position
• Switch setting
• No system reset.
• Micro SD card
• Recording configuration
• Settings
CFI EXTEL IRON 2 - V1 - 09/2013
Solution
• Check the polarity of the + and – wires
• Reattach the connectors
• Only the monitor configured for "ROOM 1" dis-
plays the picture during a call from the outdoor
station
• Check that the wires used are the correct size
and that the connection wires of the videophone
are not in the same sheath as the 230V.
• Check the position of the SW1 switches
• Check that the connection wires are not
reversed.
• Do not expose the lens of the camera directly to
sunlight or to a reflective surface.
• Check the Dip switches and the ID configurations
(p5)
• Disconnect from the power source for 30 sec-
onds.
• Insert a micro SD card
• Check that volume of the bell sound is not at 0
www.cfi-extel.com
GB10