Possible Malfunctions - Bartscher 105L Manual Del Usario

7. Possible Malfunctions

In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Malfunction
No cooling
Insufficient
cooling capacity
Device emits
loud sound
If you cannot remove the malfunctions:
do not open the body,
-
- notify the customer service point or contact the sales
agent, while providing the following information:

type of malfunction;

article and serial number
(rating plate at the rear of the device).
Cause
 Improperly connected
power cord
 Electrical circuit safety fuse
has gone off
 Power outage
 Damaged temperature
regulator
 Device is too close to
source heat or direct
sunlight
 Poor air circulation in
the device
 Improper temperature
setting
 Device is overfilled
 Device is placed on an
uneven surface
 Device is touching the wall
or other objects
Solution
 Pull the plug and reinsert it into
the socket correctly
 Check the fuse, check the
device by connecting it to
another socket
 Check the power source
 Contact the sales agent
 Ensure sufficient distance
between the device and heat
sources
 Ensure sufficient distance from
walls and other objects
 Check the settings, set lower
temperature value
 Remove excess food products
 Place the device on an even
surface
 Ensure sufficient distance from
the wall and other objects
- 35 -