Safety Precautions; For Nikon Mount - Sigma 500mm F4 DG OS HSM Manual De Instrucciones

ENGLISH
Thank you very much for purchasing a Sigma Lens. In
order to get the maximum performance and enjoyment out
of your Sigma lens, please read this instruction booklet
thoroughly before you start to use the lens.

SAFETY PRECAUTIONS

 After attaching a lens, do not look directly at the sun,
through the viewfinder. Doing so can cause damage to
the eye or loss of eyesight.
 Do not look at the sun with the lens of your camera;
otherwise you can lose your eyesight.
 Do not look at the sun through the lens. If strong direct
sunlight enters the lens, the concentration of light could
cause a fire.
 The mount part of the lens is complicated. Improper
usage may cause injury.
 Please select a sturdy tripod that is capable of
supporting this lens. If the tripod is not sturdy enough, it
may cause the lens to fall.
DESCRIPTION OF THE PARTS (P.2)
① AF Function button
② BEEP switch
12
③ AF Function Setting switch
④ Focus Preset button (NIKON: Memory Set button)
⑤ Focus Ring
⑥ Distance Scale
⑦ Focus Index Line
⑧ Mount
⑨ Focus Mode Switch
⑩ Focus Limiter Switch
⑪ OS Switch
⑫ Custom Mode Switch
⑬ Tripod Socket
⑭ Click Stop On/off Switch
⑮ Filter Holder
⑯ Lens Hood

FOR NIKON MOUNT

This lens includes an
mechanism, the same specifications as the E-type
mechanism in Nikon AF lenses. The lens is compatible
with the cameras listed in Table (A). (The models with the
★ mark require the latest version of the camera firmware
to ensure compatibility.)
 It is not compatible with film single-lens reflex cameras.
 It is not possible to use the lens with the cameras in
Table (B).
 For models not listed in Table (A) or Table (B), please
electromagnetic diaphragm