Accessory Tools; Machine Backpack Harness - Tennant V-BP-6B Manual De Operación

English
EN

ACCESSORY TOOLS

Each machine comes equipped with a variety of
accessory tools to meet your cleaning needs.
To Attach Accessory Tools:
1. For floor cleaning, attach wand to vacuum hose
and attach desired floor tool. If equipped, turn
collar on wand to lock tool in place.
2. For wands equipped with the telescopic feature, push
the release button to extend the length of the wand.
3. For off-floor cleaning, attach the desired accessory
tool directly to vacuum hose.
10

MACHINE BACKPACK HARNESS

To Properly Mount Machine on Back:
1. Fully loosen all harness straps.
2. Place the machine on your back so the weight of
the machine is resting on your hips. Fasten the hip
belt and pull belt straps forward to tighten (A).
3. Pull the two shoulder straps downward to pull the
machine towards your back (B).
4. Connect the front shoulder straps together (C).
5. For final adjustment, pull the two stabilizer
shoulder straps as needed to balance the weight
of machine (D).
A
C
6. If the weight of the machine is not resting on your
hips, adjust the shoulder harness height adjuster to
your back length. It's important to ensure machine
weight is resting on your hips to prevent shoulder
fatigue.
B
D
Tennant V-BP-6B, (01-2018)