Velux INTEGRA KLF 200 Manual Del Usuario página 9

Function as interface
Registration with VELUX INTEGRA
The illustrations below show how you choose products from the control
pad and how you assign them to inputs on the interface.
8
Tap on KLR 200.
10
Tap "Prepare one-way
control".
12
2
1
16 VELUX
®
control pad KLR 200
®
9
Tap "New product".
11
Tap "Add products".
Scroll down the display and choose
the product(s) to be assigned to an
input 1 . The products must be of
the same type.
Note: By tapping the icon, you can
see whether you have chosen the
intended products.
Tap 2 .
ENGLISH
Function as interface
Registration with VELUX INTEGRA
13
2
1
14
1 sec
Connect the supplied wire bundle to the input terminal. Press the
RESET button on the back of the interface briefly (1 second) with a
pointed object. The light-emitting diode flashes white rapidly.
Step 15 must now be carried out within 2 minutes.
Note: Take care that the red and black wire ends do not touch each
other at this point, as they may short-circuit. A short-circuit will
result in an unintended registration of products.
ENGLISH
control pad KLR 200
®
Tick the chosen product(s) 1 .
2
Tap
.
VELUX 17
®