2. Netscape
Step 1. Go to Tools / Options / Advanced / Security de-
vices.
Step 2. If the PKCS#11 module is co-
rrectly installed, it will appear in the tab
"Security devices and modules installed".
Step 3. When you have installed PKCS#11 module, you are able to
check your certificates. Open Netscapte navigator and then go to
Tools menu / Options / Advanced / View Certificates to access to
DNIe certificates. The PIN of DNIe will be required.
Enter the correct PIN of your DNie. A certificate manager assistant
window will appear and show your certificates:
- Certificate of Authentication
- Certificate of signature
Step 4. In "Authorities" tab you can view the AC DNIE 00X
certificate and the root certificate AC RAIZ DNIE.
Step 5. If you have completed all the previous steps and
you can view the certificates in "Authorities" tab, the
PKCS#11 module and the Netscape root certificate have
been properly installed.
3. Firefox
Step 1. Go to Tools Menu / Options / Advanced / Secu-
rity and "Security devices".
Step 2. If the PKCS#11 module is properly
installed, the PKCS#11 DNIe module will ap-
pear in the list of security modules and insta-
lled devices list.
SCT010 User Guide
Index
1. Welcome
2. Features
3. Technical Specifications
4. System Requirements
5. Content
6. Hardware
7. Installation
8. DNIe software installation (WinXP)
9. DNIe software installation (WinVista/7)
10. Uninstallation
11. FAQs
12. Warning: disposal of waste batteries
English
14