Bresser 7007400 Manual De Instrucciones página 18

3. Install 2 batteries (AAA size 1.5V) strictly according to the polarities
shown.
4. Reinsert the battery compartment door.
Main unit
1. Open the door of the battery compartment (11).
2. Install 3 batteries (AAA size 1.5V) strictly according to the polarities
shown.
3. Reinsert the battery compartment door.
Low battery display
When batteries need to be replaced the respective low battery indicator
for the main unit (10) or the remote sensor (5) will be shown on the
display of the main unit.
USING TABLE STAND OR WALL MOUNTING
The main unit and the remote sensor can be placed on a flat surface (e.g.
table) with the stand (foldable) (13, 21) or mounted on walls using the
recessed screw hole (14, 18).
OPERATION
Temperature and humidity
1. Press the touch control °C/°F/SET (7b) to switch the display between
°C or °F. The display will change for the indoor temperature as well as
for the outdoor temperature.
2. Once the batteries are installed the main unit will start displaying
the interior measurement information. The main unit will display the
information from the remote sensor for the first time approximately 3-4
minutes after the power supply was established.
18