Operating - Medisana RBM Instrucciones De Manejo

GB

3 Operating

14
Buttons on the control unit
• ON/OFF button (Power power supply on/off)
Switch on : Press the ON/OFF button.
The control LED for "Unit on"
Switch off : Press the ON/OFF button.
The control LED for "Unit on"
• VIBRATING MASSAGE button
Switch on : Press the VIBRATING MASSAGE button.
The control LEDs
The unit will immediately begin the vibrating massage in the
upper thigh area.
Switch off : Press the VIBRATING MASSAGE button again.
The control LEDs
• VIBRATING MASSAGE mode button
Normal : Press the Mode button until the control LED for constant
vibrating massage in the seat
Pulsierend : Press the Mode button until the control LED for constant
vibrating massage in the seat
• VIBRATING MASSAGE intensity button
Low : Press the Intensity button until the control LED for low mas-
sage intensity in the seat
High : Press the Intensity button until the control LED for high mas-
sage intensity in the seat
• ROLL MASSAGE button
Switch on : Press the ROLL MASSAGE button.
The control LED for "Roll massage on"
The unit will immediately begin the kneading massage by
means of roller technology in the neck, shoulder, back and
midriff areas consecutively.
Switch off : Press the ROLL MASSAGE button again.
The control LED for "Roll massage on"
• HEAT -Taste (HEAT heat on/off)
Switch on : Press the Heat button to turn on the heat.
The heat is emitted via the two side wings of the back
section.
The control LED for "Heat on"
Switch off : Press the Heat button again.
The control LED for "Heat on"
will light up.
will go out.
(MASSAGE in the upper thigh area on/off)
and will light up.
and will go out.
(MODE Normal/Pulse)
(Normal) lights up.
(Pulse) lights up.
(Lo low / Hi high)
(Lo) lights up.
(Hi) lights up.
(KNEADING kneading/shiatsu on/off)
will light up.
will go out.
will light up.
will go out.