Operating; Switching Off The Unit - Medisana SKM Instrucciones De Manejo

GB

3 Operating

3.4
Switching off
the unit
3.5
Using the remote
control (optional)
10
Switch the unit off by returning the selector switches
central position. When you have finished using the unit, please unplug it from
the mains outlet. After completing a massage session, wait at least 15 minutes
before switching on the unit again. Should the unit overheat during use, it will
switch off automatically.
The SKM Shiatsu massager can be controlled either using the selector switches
on the unit or with a remote control unit optionally available from MEDISANA.
To use the remote control, plug it into the designated socket
making sure that the plug's catch spring is pointing upwards.
Now plug the SKM Shiatsu massager into a suitable mains outlet (230 V).
A lightning symbol will start to flash on the remote control's display.
The remote control has 5 buttons for controlling the various functions, with
corresponding symbols being shown on the display.
Button 1 Standby
The flashing lightning symbol on the display indicates that the remote control
is connected to the power. After a short press of button 1, the symbol will stop
flashing and remain constantly visible. The massager can now be operated
using the remote control.
Button 2 Rotation
Pressing this button enables you to set the rotation of the massage heads to
forwards or, with a further press of the button, to backwards. Pressing the
button one more time switches off the rotation function.
Button 3 Vibration
This button sets vibration intensity. You have the choice of three settings
– low – medium – high. Each press of the button selects the next-highest
vibration setting. A fourth press of the button switches off massage head
vibration.
Button 4 Duration
This button enables you to set the duration of the massage to 5, 10 or 15
minutes. After each press of the button, the set massage duration will appear
on the display. You can make your selection by repeatedly pressing the button.
Once the duration has been set, the timer will count down to zero, after which
the unit will switch off automatically. If you do not wish to set a fixed time or
want to stop the massage before the timer has reached zero, press the button
one more time.
Button 5 Programme selection
With this button you can select one of three preset programmes. Each press
of the button selects the next respective programme.
Programme I The massage direction changes every 15 seconds – the
vibration intensity changes every 10 seconds.
Programme II The massage direction changes every 15 seconds – the
vibration function is deactivated.
to their original
on the unit,