Puky R1-R2002L Manual De Instrucciones página 10

Scooter
In order to maintain the high, design-specified
safety levels, all worn or defective parts are
to be immediately replaced by original PUKY
spare parts. For safety reasons, the vehicle
should not be used until it has been fully
repaired. Bent or deformed parts should not
be repaired but instead should be replaced.
Wear-and-tear-parts: tyre, rim, inner/outer
cable, brake block, handlebar grip.
Replacing wheels
Replacement wheels can be obtained from
your specialist dealer or by contacting us
via the Internet using www.puky.de.
The vehicle must not be cleaned with a high-
pressure cleaner. Clean the vehicle using a
mild soapy solution and carefully wipe dry
using a soft cloth. Keep the vehicle away
from corrosion-promoting materials (road salt,
sea water, fertiliser). The vehicle must not be
stored in damp conditions. Apply standard
bicycle oil to the bearings from time to time.
Check braking effect (if applicable). Braking
surfaces should be free from grease and in
pre-scribed position. When replacing rim brake
pads, you should ensure that they match the
rim (aluminium/alloy), otherwise braking effect
cannot be guaranteed. Ensure air pressure in
tyres is correct (recommended air pressure
will be found on the lateral faces of the tyre).
Similar to car tyres, considering vulcanised
India rubber there is a risk that stains may
form in areas where tyres contact the floor
covering. Please protect contact face
between floor and tyre.
Valve caps need to be firmly tightened
and kept away from childrens' reach
(danger of swallow up).
Unpacking and scope of delivery
Do not use any sharp objects when
opening the packaging and removing
protective material. By doing so, you may
damage the paint or parts of the vehicle.
z Remove all parts from the packaging.
z Remove the protective material. Keep
all packaging material out of reach of
children – there is a risk of suffocation.
z Examine the package for complete-
nessand proper condition. If anything is
missing, please contact your dealer before
you start to assemble the vehicle.
10