Bresser TemeoTrend LB Manual De Uso página 33

the [▼], [▲] button at alarm display mode.
Press [MODE] to return to clock display mode.
6. BELL / ALARM
6a) HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [ALARM] once to display alarm time. If the alarm is
disarmed, the time will be displayed as "OFF".
2. Hold [ALARM] for two seconds, The hour digits will blink.
3. Enter the hour using [▼] or [▲].
4. Press [ALARM]. The minute digits will blink.
5. Enter the minutes using [▼] or [▲].
6. Press [ALARM] to exit.
7. Repeat the same procedure to set single alarm.
6b) ALARM FEATURE
• Weekday Alarm
The alarm sound will be activated and the icon will flash on
weekday when it is armed and the alarm time is reached.
• Single Alarm
The alarm sound will be activated and the icon will flash once
when it is armed and the alarm time is reached.
Once finished, it will be disabled automatically.
6c) HOW TO STOP AN ALARM
Press [ALARM] on the unit to stop an alarm.
33
GB/IE