General Power Tool Safety Warnings - Makita DPB181 Manual De Instrucciones

ENGLISH (Original instructions)
1. Battery cartridge
2. Button
3. Red indicator
4. Star marking
5. Trigger-lock button
6. Switch trigger
7. Lamp
SPECIFICATIONS
Max. cutting capacity
Blade size
Overall dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting in plastic and ferrous
materials.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS PORTABLE BAND
SAW SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessories contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
2. Use only blades which are listed in
"SPECIFICATIONS".
3. Check the blade carefully for cracks or damage
before operation. Replace cracked or damaged
blade immediately.
4
Explanation of general view
8. Tighten
9. Loosen
10. Lever
11. Lower holder
12. Upper holder
13. Bottom bearing
14. Wheel
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
Net weight
Rated voltage
ENE088-1
GEA010-1
GEB065-2
15. Stopper plate
16. Screws
17. Blade
18. Hook
19. Axis
20. Stop ring
21. Cutting wax
473 mm x 197 mm x 231 mm
4. Secure the workpiece firmly. When cutting a
bundle of workpieces, be sure that all workpieces
are secured together firmly before cutting.
5. Cutting workpieces covered with oil can cause the
blade to come off unexpectedly. Wipe off all
excess oil from workpieces before cutting.
6. Never use the cutting oil as a cutting lubricant.
Use only Makita cutting wax.
7. Do not wear gloves during operation.
8. Hold the tool firmly with both hands.
9. Keep hands away from rotating parts.
10. When cutting metal, be cautious of hot flying
chips.
11. Do not leave the tool running unattended.
12. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
DPB181
64 mm dia.
64 mm x 64 mm
3.2 m/s
835 mm
13 mm
0.5 mm
3.2 kg
D.C. 18 V