Explanation Of General View; General Power Tool Safety Warnings - Makita JR3060T Manual De Instrucciones

ENGLISH (Original instructions)
1 Shoe
2 Shoe button
3 Lever
4 Stopper
5 Switch trigger
SPECIFICATIONS
Model
Length of stroke
Max. cutting capacities
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
RECIPRO SAW SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4
All manuals and user guides at all-guides.com

Explanation of general view

6 Lock button
7 Adjusting dial
8 Blade clamp sleeve
9 Released position
10 Fixed position
Pipe
Wood
-1
)
2. Use clamps or another practical way to secure and
ENE021-1
3. Always use safety glasses or goggles. Ordinary
ENF002-1
4. Avoid cutting nails. Inspect workpiece for any
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the work-
7. Hold the tool firmly.
8. Make sure the blade is not contacting the work-
GEA010-1
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
11. Always switch off and wait for the blade to come
12. Do not touch the blade or the workpiece immedi-
13. Do not operate the tool at no-load unnecessarily.
14. Always use the correct dust mask/respirator for
GEB008-6
15. Some material contains chemicals which may be
SAVE THESE INSTRUCTIONS.
11 Blade
12 Blade clamp lever
13 Limit mark
14 Brush holder cap
15 Screwdriver
JR3060T
32 mm
130 mm
255 mm
0 - 2,800
485 mm
4.4 kg
/II
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it unsta-
ble and may lead to loss of control.
eye or sun glasses are NOT safety glasses.
nails and remove them before operation.
piece before cutting so that the blade will not
strike the floor, workbench, etc.
piece before the switch is turned on.
only when hand-held.
to a complete stop before removing the blade from
the workpiece.
ately after operation; they may be extremely hot
and could burn your skin.
the material and application you are working with.
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
JR3070CT
4.6 kg