Publicidad
Idiomas disponibles
Idiomas disponibles
4. Storage, cleaning and transport
• On finishing work clean, dry and store the full body harness in well aired and shady rooms.
• During transportation of the full body harness it must be stored in a suitable transport container
(for example equipment bag or equipment case).
• Avoid contact with acids, corrosive fluids and oils. If unavoidable, clean with a mild detergent and
plenty of water (40°C) as soon as possible. Always allow to dry naturally, never close to fire or
other sources of heat.
Attention: Adhere strictly to the cleaning instructions!!
5. Material Specifications
The full body harness is made from the following materials.
Webbing and straps and sewing thread from Polyamide
Hardware from Aluminium and stainless steel
Click fit fasteners from Aluminium and stainless steel
Plastic parts from synthetic materials
Seat cushion from synthetic material
Karabiner hooks from Aluminium or steel
6. Length of Use
The length of use is dependant upon the respective operating conditions. From experience to date,
under normal operating conditions the length of use of the full body harness can be assumed to be
from 6 to 8 years. The year of manufacture of the full body harness is written on the name plate.
7. Kontrolle
• Before starting work inspect the full body harness for wear of damage. Check freedom of
movement. Check the legibility of the marking.
• Should there be any doubts about the safe condition of the system or its components, then they are
to be replaced immediately. This must be carried out by the manufacturer or another competent
person.
• As required, but at least once a year, have an inspection carried out by the manufacturer or a
competent person.
Attention: Damaged full body harnesses and ropes may not be used.
• Systems strained by falls are to be taken out of use and to be returned to the manufacturer or an
authorized repair work shop for servicing and a new inspection.
Attention:
Do not make any alterations to the product.
Repairs may only be carried out by the manufacturer.
An Instructions for Use / Test Book is supplied with every full body harness. This must be kept with
the equipment.
Also strictly observe the instructions for use of the products used in conjunction with the full body
harness as well as the appropriate, valid accident prevention regulations.
Notified Body involved for the EC Type Testing:
DGUV Test Prüf- und Zertifizierungsstelle Fachbereich Persönliche Schutzausrüstungen
Zwengenberger Straße 68,
Notified Body involved for the quality inspection:
DEKRA EXAM GmbH Prüflaboratorium für Bauteilsicherheit
Dinnendahlstraße 9, D-44809 Bochum, Kennnummer
Issue: 16.08.2016
D-42781 Haan, Identification Number
0299
0158
Publicidad
