Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Sanding operation
NOTICE:
Never run the tool without the abrasive
disc. You may seriously damage the pad.
Hold the tool firmly. Turn the tool on and wait until it
attains full speed. Then gently place the tool on the
workpiece surface. Keep the pad flush with the work-
piece and apply slight pressure on the tool.
Polishing operation
Optional accessory
NOTICE:
Continuous operation at high speed
may damage work surface.
1.
Applying wax
Use the sponge pad. Apply wax to the sponge pad or
work surface. Run the tool at low speed to smooth out
wax.
NOTE: First, wax a not conspicuous portion of the
work surface to make sure that the tool will not
scratch the surface or result in uneven waxing.
2.
Removing wax
Use the felt pad. Run the tool to remove wax.
3.
Polishing
Apply the wool pad gently to the work surface.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Hook-and-loop type abrasive discs (with pre-
punched holes)
•
Hook-and-loop type sponge pad
•
Hook-and-loop type felt pad
•
Hook-and-loop type wool pad
•
Pad 150 (Super soft, Soft, Hard)
•
Pad 130 (Polishing)
•
Side grip
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
8 ENGLISH
Publicidad
Tabla de contenido
