Initial Operation - Bosch GCC 30-4 Professional Manual Original

OBJ_BUCH-2515-003.book Page 28 Tuesday, April 25, 2017 8:11 AM
28 | English

Initial Operation

Note: First, complete the tutorial for the app/web-based application. This will provide
you with a better overview of the procedure for creating the inventory and using the
software.
Once the 4 battery has been inserted or put into use, the GCC 30–4 Professional will
send out a continuous signal. The Bluetooth® signal will only stop if the battery is
drained or faulty or if it is removed.
You can find further information directly in the app/web-based application from
Bosch.
Attaching the GCC 30–4 Professional
Attaching the GCC 30–4 Professional
 Observe the safety information and processing instructions provided with
the two-part adhesive.
– Thoroughly mix both parts of the two-part adhesive 5 together.
– Immediately apply the mixed adhesive to the underside of the
GCC 30–4 Professional as a thin film or in the form of droplets.
Note: Use enough material to ensure that the surface is completely covered with
adhesive. If the bonding surface is curved, you need to use proportionately more
adhesive to ensure that the joint is as large as possible.
Note: The data matrix code 8 must not be covered by adhesive.
– Establish firm contact between the GCC 30–4 Professional and the surface of the
object that is to be bonded. Ensure that the bonded parts are not moved until they
have been completely fixed.
Before the adhesive hardens, you can use acetone (solvent) to remove excess adhe-
sive from the object or from any tools used for mixing.
Store the two-part adhesive in a cool, frost-free and dry environment.
Removing the GCC 30–4 Professional
Do not use force to remove the GCC 30–4 Professional. Do not use any sharp or
pointed tools which may cause damage to the surface of the identified object.
Attaching the GCC 30–4 Professional to a cable (see page 10–11)
You can attach the GCC 30–4 Professional module to a cable using the
GCC 30–9 Professional retaining clip.
1 609 92A 3W4 | (25.4.17) Bosch Power Tools