Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GCC 30-4 Professional Manual Original

OBJ_BUCH-2515-003.book Page 29 Tuesday, April 25, 2017 8:11 AM
Data Transmission via
The transmission interval of the GCC 30–4 Professional is eight seconds. Depending
on ambient conditions, up to three transmission intervals may be required before the
GCC 30–4 Professional is detected. If the GCC 30–4 Professional is not detected,
check the following:
– Is the battery too low or drained?
▷ Change the battery (order number 1 600 A00 92A).
– Is the distance to the mobile terminal device too great?
▷ Reduce the distance between the mobile terminal device and the
GCC 30–4 Professional.
Note: During initial set-up, GCC 30–4 Professional modules that are already as-
signed to an object are not displayed or cannot be connected.

Maintenance and Service

Help: The TrackMyTools Support team will be happy to help you with any questions
you may have relating to your GCC 30–4 Professional module.
Contact details can be found at: www.bosch-trackmytools.com

Maintenance and Cleaning

Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our prod-
ucts and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit arti-
cle number given on the nameplate of the product.
Bosch Power Tools
®
1 609 92A 3W4 | (25.4.17)
English | 29