"PVR Storage Information"
"PVR Setting"
"Remove USB safely"
1.
The following message appears:
"You can safely remove USB device now!"
2.
Remove the USB device.
1.
Press the yellow button to format
the disk.
2.
Press the blue button to open the
"DVR Set" window.
1.
"Timeshift": Select "On" or "Off".
2.
"Jump": Select "30 sec", "1 min",
"5 min", "10 min" or "30 min".
3.
"Timeshift to Record": Select "On"
or "Off".
10
10
Cleaning and maintenance
Warning!
• Before cleaning or maintenance, switch off the
device, remove the mains plug from the wall
socket and wait until the device has cooled
down.
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth. Thoroughly dry the outside of the
device with a clean, dry cloth.
English