Technical Specifications; Disposal Of Old Electrical Appliances - cecotec CONGA 750 Manual De Instrucciones

ENGLISH
Fault Beeps
No
01
02
03
NOTE: if the problem cannot be solved with the above-mentioned methods, please try the
following operation.
1. Turn off the power switch at the bottom of the machine.
2. If restarting fails to solve the problem, please send the machine to the Technical Support Service
for maintenance.
3. The machine has a safety system against excessive discharge and will automatically cut off the
power supply when the battery voltage is too high.
7. TECHNICAL ESPECIFICATIONS
Model: Conga 750
Product reference: 05136
Voltage: 10.8 V
Power supply: 17 W
Voltage and frequency: 100-240 V, 50/60 Hz
Made in China | Designed in Spain
ADAPTER
Rated output voltage (V)
Rated output current (A)
BATTERY
Battery specification

8. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE),
specifies that old household electrical appliances must not be disposed of with the normal
unsorted municipal waste. Old appliances must be collected separately, in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on human
health and the environment.
20 CONGA 750
Error
The bumper error.
Free-fall sensors error.
Other errors.
Solution
Check if the bumper is blocked.
The free-fall sensors are dirty,
please clean them.
Voltage is too low and external
assistance is needed, or the power
switch is off while charging.
19
0.6
Li-ion Rated Capacity: 2600 mAh