GRE POOL EXPERT Manual De Instrucciones página 3

There is a white cover inside the box that is for use on extremely hot days to avoid the water
overheating.
Easy assembly
The only tool you need is a screwdriver to fix the hosepipe to the solar heater. There are long
hosepipes included for easy installation. If you need to connect more than one solar heater, the
short piece of hosepipe can be used. We recommend not assembling more than 4 solar heaters in
series. If more are needed, for a very large pool, we recommend assembling 2 or 3 series in
parallel.
We recommend using one solar installation for pools up to 7.5 - 10 m
(This is merely a suggested size as the result depends on exposition time and solar power).
Easy assembly
Open the box and check that all the elements are included according to the following list:
1-
Solar heater with detachable transparent lid
2-
Unfold the feet at the bottom part to obtain a 30º inclination
3-
Long tube (1.2 m) for connecting the solar heater to the pool
4-
Short tube for coupling 2 heaters at the same time
5-
2 adaptors for 32/38 mm connection
6-
Bag with metallic clamps
7-
Rubber reduction pies 38/32 mm
8-
White cover
9-
Instruction manual
Find the correct position to locate the solar heater
Stop the pump and make sure there is no water in the circuit
Assemble the feet of lower part of the solar installation.
3
.