GRE POOL EXPERT Manual De Instrucciones página 4

Assemble the 2 adaptors at the lower part of the solar heater
Install the hosepipes between the filtering unit, the solar heater and the swimming pool
32 mm hosepipe adaptor: Connect this directly to the adaptor and fix it with the metallic
clamps.
38 mm hosepipe adaptor: First connect the 32/38 mm rubber reduction piece to the
adaptor. Later connect the 38 mm hosepipe to the adaptor and fix it with the metallic
clampRemove the dust and filth from the transparent cover

Start the filtering equipment with the water circuit open.

Check the water-tightness of the heater and of the hosepipes

Now, you can start saving money thanks to the solar heater by heating your pool free of
charge
Installation of several systems
Identical assembly to that above except we use the short hoses to couple the heaters with
each other
Protection for winter
To avoid icing problems, completely purge the system during the winter Store the heater in
a dry spot and free from icing.