Bosch BLR 10 Manual De Instrucciones página 19

ditional pressing of the "AUTO OFF" but-
ton 6, the automatic levelling for both axes
is switched on again.
"Left" and "Right" Direction
Buttons
In the Horizontal Position of the con-
struction laser, the "left" 2 and the "right" 5
direction buttons have the following func-
tion:
– With automatic levelling switched on or
in single axis inclined operation: The la-
ser point or laser line is rotated in the
rotational plane of the construction la-
ser.
– With automatic levelling switched off:
The laser point, laser line or rotational
plane is rotated about the X axis of the
construction laser.
Please refer to the operating instructions of
your construction laser for the orientation of
the X and Y axes with respect to the con-
struction laser.
In the Vertical Position of the construction
laser, the "left" 2 and the "right" 5 direction
buttons have the following function:
– The laser point, laser line or rotational
plane is rotated about the Y axis of the
construction
whether the automatic levelling is
switched on or off).
1 609 929 F28
laser
English–6
(irrespective of
(03.08) T