Important Safety Notice - Huwil Huwilift E-Senso Instrucciones De Montaje

Preface
Dear customer,
by choosing the Huwilift E-Senso you have opted for an electromechanical fitting solution that is technically advanced and
performs with great efficiency. Your Huwilift E-Senso has been manufactured on our premises with extreme care and precision
and has gone through numerous quality and safety checks in order to ensure that it operates smoothly and safely.
But you yourself can also make an important contribution towards ensuring that you remain satisfied with your Huwilift E-
Senso for a long time.
mportant safety notice
I
The installation must be carried out in accordance with the assembly instructions, otherwise there is a risk of injury.
The lifting arm and the gas pistons of the fitting must not be opened under any circumstances.
Arbitrary modifications of the Huwilift E-Senso exclude liability of the manufacturer for resulting damages.
This fitting is solely intended for use as lid stay for wall units in living, bath, office and kitchen furniture, according
to the designated door weight and the indicated cabinet height. Any use oher than this is regarded as not designated
use and the manufacturer is not liable for any resulting damages. All associated risks are borne solely by the
operator.
The fitting with motor and control unit must not be opened, as otherwise the warranty is considered
void.
Designated use also comprises the compliance with the specifications provided in the manufacturer´s assembly and
operating manuals.
Please also take into account general, legal and other regulations and laws – including those of the operating
country – as well as existing environmental protection regulations! Existing local regulations of government safety
associations or other supervisory institutions must be acknowledged at all times.
Service and Repairs must be carried out by a suitably qualified person.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
This electromechanical fitting is admitted for operation in countries of the European Union only.
CE mark and conformity
This electromechanical fitting complies with effective European and national norms and regulations. The conformity
has been established and the corresponding documents of evidence are deposited with the manufacturer.
Notice for furniture manufacturers:
This electromechanical fitting is subject to testing according to the machinery directive 2006/42/EC, which requires
an evidence of conformity for the operable piece of furniture from the furniture manufacturer, resp. distributor.
On the part of the furniture manufacturer all norms and legal specifications for the operation of this electro-
mechanical fitting have to be obeyed.
The asembly instruction as well as the operating manual have to be handed over to the final customer.
Advice for the furniture manufacturer resp. interior design planner
Please avoid diagonal applications in wall units with E-Fittings, as this may lead to collisions of the lids.
The compliance with this safety notice will guarantee long-lasting satisfaction with your Huwilift E-Senso.
Please refer to us for any doubt or question you might have.
© HUWIL 05/2010
Huwilift E-Senso / E-Senso+
E-Senso+ E-Senso
3