Detecting The Trailer Camera; Cleaning And Caring For The Lcd Monitor; Warranty; Disposal - Dometic M 55L AHD Instrucciones De Montaje

M55L AHD, M75L AHD
8.5

Detecting the trailer camera

This function is required when using a trailer camera (fig. c, page 6) if the system is activated
automatically via the reverse gear. To initialise the automatic detection switch off ignition once after
setting. To initialise the automatic detection switch off ignition once.
•
One camera connected (e.g. vehicle without a trailer):
the camera connected to CAM1 (1) is activated.
•
Two cameras connected (e.g. vehicle with a trailer):
the camera connected to CAM3 (2) is activated (CAM1 is inactive; CAM1 can only be activated
via the "CAM" button)
9

Cleaning and caring for the LCD monitor

A
NOTICE! Beware of damage
•
Do not use sharp or hard objects for cleaning, as these may damage the monitor.
•
Remove the cable before cleaning the monitor to prevent short circuiting.
➤ Clean the monitor with a soft, damp cloth from time to time.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and warranty processing, please send the following items:
•
Defect components
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
11

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
EN
Cleaning and caring for the LCD monitor
19