Rear Panel - Tangent Dab2go BT Manual Del Usuario

• LIST (in Smart Device mode): Press the LIST button to show paired Bluetooth device
list. And to choose a previously connected device. Up to 10 stored and paired devices
possible.
• PAIR (in Smart Device mode): Bluetooth PAIR button:
Press and hold PAIR button to enable pairing with Bluetooth device, then make your
Bluetooth device search for your radio, select 'DAB2GO BT' from Bluetooth device list
and enter '0000' for the password if necessary.

Rear panel

1
1. 12V/1A: Use this input to connect the radio's DC power supply.
2. HEADPHONES: Inserting a headset plug will turn off the internal speaker. The output
volume for the headset is controlled by the volume knob.
3. RECORD OUT: The radio can be used as a tuner by connecting it to an amplifier.
4. AUX IN: Connect any stereo or mono audio source to this stereo input.
5. UPDATE PORT: Software update port. Please leave this for service professional!
6. BATTERY COMPARTMENT: Loosen the big screw on the right side of the battery lit
using e.g. a coin. Install 6 pcs AA sized batteries in the compartment.
4
3
2
5
6
6