Cleaning Upholstery - POLTI Vaporetto SV205 Manual De Instrucciones

Ensure that the points in Sections 1 and 2 have
been followed.
6.1 To clean rugs and carpets, rest the brush
(with the cloth attached) on the special frame
so that it can slide over the surface (6).
6.2 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, use the medium steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If the ignition/steam-adjustment
dial (E) has been turned from the "OFF" po-
sition, by inserting the handle tube in the
coupling hole, the appliance will start to
emit steam. Always face the appliance
downwards, not directing it towards people,
animals or objects.
6.3 About 30 seconds after it has been turned
on, the appliance will start to dispense steam
6.3 Clean the floors by moving the brush.
WARNING: Do not
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the power
supply from the electric socket and wait a
few minutes to allow the cloth to cool.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformation have occurred.
7. CLEANING GLASS, WINDOWS
AND TILES
WARNING: To clean glass surfaces in parti-
cularly cold seasons, preheat the windows
starting from a distance of about 50 cm
from the surface.
Make sure that chapter 1 has been completed.
Only use the steam gun.
7.1 Connect the adapter to the steam gun.
To connect the accessory to the accessory-
connection socket (I), just insert until the ac-
cessory-locking button clicks (7). Fit the cap
to the adapter (8).
7.2 Attach the frame to the adaptor by inser-
ting hook under slot B (9), then turn the frame
(10) , so that hook C is wedged into slot D (11).
use the appliance
| 20 |
To mount the frame to the adaptor, it is first
necessary to attached the cap to the adap-
tor. Do not mount the frame without having
first attached the cap.
7.3 Plug the power lead into a suitable socket
with an earth connection.
7.4 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, use the medium steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
7.5 About 30 seconds after it has been turned
on, the appliance will start to dispense steam.
7.6 Clean the surface.
Windows should be cleaned in 2 stages:
- Steam the surface to be cleaned to dissolve
the dirt, using the steam control lever;
- Rub the window-cleaner frame over it to re-
move the dirt, without steaming.

8. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
Make sure that chapter 1 has been completed.
Only use the steam gun.
8.1 Connect the adapter to the steam gun.
To connect the accessory to the accessory-
connection socket (I), just insert until the ac-
cessory-locking button clicks (7). Fit the cap
to the adapter (8).
8.2 Plug the power lead into a suitable socket
with an earth connection.
8.3 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, use the medium steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
8.4 About 30 seconds after it has been turned
on, the appliance will start to dispense steam.
8.5 Go over the surface to be cleaned. Use of
steam allows the most efficient sanitising of
the surface, dissolving dirt and removing grea-
se, germs and mites; it also brightens the co-
lour of fibres.