Descargar Imprimir esta página

Maintenance And Cleaning / Mantenimiento Y Limpieza - Sammic L-EQ Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
IX.-MAINTENANCE AND CLEANING / MANTENIMIENTO Y LIMPIEZA
One of the greatest advantages of purchasing this scale model is that it requires minimum
maintenance and it is very simple to keep it in favorable conditions.
Do not use a flow of water to clean your scale. Use a damp rag and clean each of this
components daily: plate, turret,and keyboard.
To remove oil and greasy substances, use a dry and clean rag, rubbing the dirty area several
times.
Do not use detergents or corrosive liquids while cleaning.
Do not place the scale where there is a lot of moisture and/or dust.
When you clean the scale make sure that there are not any papers, pieces of meat or any other
kind of material under the plate or under the plate-holder that could obstruct the adequate
operation of your scale.
Periodically check the jack (where the ac/dc power supply is inserted) to make sure it is in good
condition.
Periodically check the ac/dc power supply to make sure the ends are in good condition and that
the cable is not twisted or tangled.
Regularly check the scale to assure it is correctly leveled, that the four leveling bases had being
well supported.
Do not expose your scale to temperatures below -10 ºc (14 ºf) or above 40 ºc (104 ºf).
Never press the keyboard with objects such as pencils, pens, knives, etc.
Do not drop hard the product to be weighted on the plate of the scale because with the time it
could damage the load cell.
ENGLISH
17

Publicidad

loading