Changing The Engine Oil - Zipper Maschinen ZI-STE3000L Manual De Instrucciones

Spark plug
Valve clearance
Combustion chamber
Fuel tank and fuel
tank filter
Fuel pipe
18.3

Changing the engine oil

Change the oil when it's still warm from the operation.
Ensure that the engine switch in the OFF position.
Remove the screw of the cover on the side and remove
the cover. Remove the oil plug cap.
Tilt the machine and let the oil flow into a box.
Refill new engine oil up to the lower edge of the oil plug.
ATTENTION: Dispose the old oil skilled!!! Pour it into a leak proofed
box and bring it to a recycling center.
Z.I.P.P.E.R Maschinen Austria
Changing
Control
Change
Control,
adjustme
nt
Clean
Clean
Control
www.Zipper-maschinen.at
X (1)
Every 300 operation hours (2)
Yearly (2)
Every 2 years (2)
Stromerzeuger / Generator ZI-STE3000L
MAINTENANCE
X
X
X(2)
Seite 39