Safety notes
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following notes.
READ THESE INSTRUCTIONS BEFORE USE.
DO NOT THROW AWAY THESE INSTRUCTIONS.
DANGER!
Risk of electric shock!
A faulty electrical installation, excessive line voltage or incorrect
operation may result in an electric shock.
− Connect the cleaner only to an alternating current (AC)
power supply. Make sure that the voltage corresponds
with the voltage details on the device. The cleaner must
be operated using (120 V / 60 Hz) alternating current (AC).
− Always connect the cleaner to a properly earthed socket.
− Do not use extension cords.
− Only connect the cleaner to an easily accessible socket so
that you can quickly pull the plug in an emergency.
− Never leave the cleaner unattended when it is connected
e cleaner u
to the power socket. Disconnect the power after every use.
r sock
ocket. Di
− Always unplug the cleaner from the power socket before
nplug the c
lug the
refilling it with water.
g it with wa
it with w
− Make sure that your hands are dry before using the
sure tha
sure that
cleaner, before touching the plug or power connections.
, befo
, be
− Do not use the cleaner if the housing or cord is defective
or has other visible damages. In the event of damage,
only have the cleaner serviced by the manufacturer, its
customer service team or a similarly qualified person to
avoid risks.
− Always pull the plug out of the socket:
• before you fill the cleaner with water,
• before you clean the cleaner,
• if a fault occurs,
• in the event of a storm.
AFTER SALES SUPPORT
USA
800-223-1898
rnating cur
e voltage co
e voltage
e device. Th
device. Th
0 Hz) alter
Hz) alte
ner to a pro
r to a p
ords.
rds.
eaner to an
aner to a
kly pull the
y pull th
leaner
et. D
Safety
voltage
oltage
ting c
info@electra-craft.com
USA
y
11